Specifications of TW-A8SE
Input Sensitivity: 100mV
Frequency Response: 2Hz~188KHz(-3dB)
THD: ≤ 0.02%(10W, 8Ohms, 1KHz)
SNR: 100dB (unweighted)
Power Outputs: 2×50W(RMS, 8Ohms)
Input Impendence: 47Kg
Dimensions: 430mm×290mm×168mm
Weight: 16.5kg
Description
G&W's top of the range:the solid-state single-ended class A TW-A1.1SE pre-amp and TW-A8SE power amplifier.
8kg heat dispenser on the top for sufficient heat releasing, brings up pure musicality, steady soundstage and accurate imaging.
Gold-plated CMC speaker terminals for secure and long-term connection.
600W transformer for energetic power; highly integrated PCB for the shortest connection and increased transparency of music.
Gold-sealed MJI5024/MLI5025 by Motorola 250W each.
Hitachi 2SK214/2SJ77 off-set current 30-80mA based on the designer's monitoring, directly fixed on heat sinks for reliable and stable performance.
UK made BHC electrolytic capacitors for excellent musicality, subtle resolution and upgraded sound quality.
US made silver-plated Teflon speaker cables & TaraLabs RSC signal cables inside connected to CMC spearker & RCA terminals respectively; separate cabling for high channel separation; excellent internal layout and arts and crafts.
Features of TW-A8SE Single-Ended Class A Power Amplifier
The single-ended circuit in TW-A8SE represents the expert knowledge and over ten years of experience by G&W in the field of transistor circuit design
“Soft clipping” technology is also used to eliminate the harsh sound that results when overdriving occurs
Gold plated double-sided PCB with copper foil (70 m)
Integral design, power transistors soldered directly into the PCB, to ensure the shortest signal path
4 pairs of Motorola MJ15024/MJ15025 in push-pull output stage (Class A)
Professional E shape heat sink on top, weight: 8kg.
British BHC electrolytic capacitors (10000 F×4) in power filter
High-quality ferrite cores toroidal transformer (600W)
WIMA, Philips, Rubycon, and BHC capacitors, KOA resistors.
Laser engraved dalbergia deluxe panel
Gold plated CMC RCA jacks and speaker terminals, to ensure no-loss signal transmission
As electro magnetic shielding, stainless steel case is used to minimize magnetic field interference caused by power transformer
High performance audio cables, with Silver-Plated Oxygen Free Copper (SP-OFC), and Teflon insulation
